Jackson 24 LT - Manual (Page 21)

18
Jackson dishmachines come with a wide variety of conduit and fittings for use in routing the wires of the machine. The list below pro-
vides for most of stock of such items. When ordering, remember that Jackson does not offer pre-cut sections of conduit for your
machine, instead it is sold by the foot. Please take into account the slack that will be necessary once installing the new conduit to ensure
that it fits correctly. It is recommended that you order at least 6” more conduit than you require to ensure that you have enough for trim-
ming. Tubing and hose are ordered by the foot. Jackson MSC Inc. reserves the right to require minimum ordering quantities for the
items below.
ORDERING REPLACEMENT CONDUIT & FITTINGS/HOSE & TUBING
CONDUIT:
Conduit, 1/2”, Liquidtite 5975-101-25-00
Conduit, 1/2”, Non-Metallic 5975-111-46-57
Conduit, 1/2”, PVC 5975-105-04-00
Conduit, 1/2”, Sealtite 5975-105-01-00
Conduit, 1/2”, Xtraflex 5975-105-06-44
Conduit, 3/8”, Liquidtite 5975-105-02-00
Conduit, 3/4”, Cole-Flex 5975-105-05-00
Conduit, 3/4”, Liquidtite 5975-105-03-00
Conduit, 3/4”, Non-Metallic 5975-011-47-71
Conduit, 3/4” Xtraflex 5975-105-07-44
Conduit, 1”, Carlon 5975-011-68-42
CONDUIT FITTINGS:
Elbow, Cole-Flex, 1/2”, 90° 5975-205-40-00
Elbow, Xtraflex, 1/2”, 90° 5975-205-44-44
Elbow, Xtraflex, 3/4”, 90° 5975-205-45-44
Fitting, 1/2” Straight 5975-011-45-13
Fitting, 1/2”, Straight, Zinc Plated 5975-111-89-89
Fitting, 1/2”, 45° 5975-011-45-23
Fitting, 1/2”, 45°, Zinc Plated 5975-111-89-86
Fitting, 1/2”, 90° 5975-011-45-14
Fitting, 1/2”, 90°, Zinc Plated 5975-111-89-88
Fitting, 3/4”, Straight 5975-011-47-72
Fitting, 3/4”, 45° 5975-011-47-74
Fitting, 3/4”, 90° 5975-011-47-73
Fitting, 1”, Straight 5975-011-70-75
Fitting, 1”, 90° 5975-011-68-43
Fitting, Cole-Flex, 1/2” Straight 5975-205-03-00
Fitting, Cole-Flex, 3/4” Straight 5975-205-41-00
Fitting, Cole-Flex, 3/4”, 90° 5975-204-42-00
Fitting, Liquidtite, .231 ID/.394 OD 5975-011-49-03
Fitting, Liquidtite, .25 ID/.546 OD 5975-011-65-51
Fitting, Liquidtite, .27 ID/.48 OD 5975-011-59-50
Fitting, Liquidtite, 1/2”, 90° 5975-111-01-00
Fitting, Liquidtite, 3/8”, Straight 5975-205-03-82
Fitting, Liquidtite, 3/8”, 90° 5975-205-02-82
Fitting, Liquidtite, 3/4”, Straight 5975-205-15-02
Fitting, Liquidtite, 3/4”, 45° 5975-205-01-82
Fitting, Liquidtite, 3/4”, 90° 5975-205-07-82
Fitting, Xtraflex, 1/2”, Straight 5975-205-47-44
Fitting, Xtraflex, 3/4”, Straight 5975-205-46-44
Nut, 1-1/4” 5975-011-42-54
HOSE:
Hose, 3/16” ID x 5/16” OD 4720-601-40-00
Hose, 1/4” ID x .062” Wall, Excelon 4720-111-59-46
Hose, 1/4” ID x 1/2” OD, 300-350 PSI 4720-011-95-43
Hose, 3/8” ID x 5/8” OD, 300 PSI 4720-002-31-63
Hose, 3/8” ID x 5/8” OD, PVC 4720-011-35-41
Hose, 3/8” ID x 3/4” OD, PVC 4720-111-35-41
Hose, 1/2” ID x 3/4” OD 4720-011-94-01
Hose, 1/2” ID, Reinforced 4720-011-63-06
Hose, 5/8” ID x 7/8” OD, PVC 4720-601-14-00
Hose, 3/4” ID x 1” OD 4720-011-94-10
Hose, 3/4” ID, Nylon Reinforced 4720-011-63-02
Hose, 1” ID x 1-1/4” OD, EPDM 4720-111-39-73
Hose, 1 1/4” ID x 1 1/2” OD, Reinforced 4720-601-42-00
Hose, 1 1/4” ID, Reinforced 4720-011-44-47
Hose, 1 1/2” ID, Clear Wire Reinforced 4720-111-34-60
Hose, 2” ID, Nylon Reinforced 4720-011-63-25
Hose, 2” ID, Reinforced Flex Drain 4720-011-63-04
Hose 2” ID x 3” OD, EPDM 4720-011-88-02
TUBING:
Tubing, 1/8” OD, Paraflex 4720-111-58-09
Tubing, 3/16” ID x .54” OD, CPVC 4720-111-35-31
Tubing, 1/4” OD 4720-111-51-65
Tubing, 1/4” OD, Blue 4720-601-11-00
Tubing, 1/4” OD, Red 4720-601-12-00
Tubing, 1/4” OD, White 4720-601-13-00
Tubing, 1/4” OD, Paraflex 4720-111-51-70
Tubing, 1/4” ID x 3/8” OD, Tygon 4720-001-97-65
Tubing, 1/2” ID x 13/16” OD, Polypropolene 4720-601-24-00
Tubing, 5/16” x 7/16” OD, Clear
4720-111-35-34
Tubing, 5/16” ID x 1/2” OD, Flexible 4720-011-35-21
Tubing, 3/8” ID x 1/16” Wall, Clear 4720-601-22-00
Tubing, 3/8” OD, White Polypropolene 4720-011-50-49
Tubing, 5/8” ID with .125” Wall 4720-002-12-20
Tubing, 3/4” ID x 1/8” Wall, Polypropolene 4720-601-25-00
Tubing, 3/4” ID x 1-1/8” OD, Nylon 4720-001-84-01
Tubing, 1” Polybrade 4720-011-69-16
Tubing, 1” ID x 1-3/8” OD, Polypropolene 4720-601-23-00
Tubing, 1 1/2” Polybrade 4720-011-69-17