John Deere OMGX10742 J9 - Manual (Page 19)

Removing - 15
REMOVING
8. Roll tractor forward carefully until rear of upper mounting
frame (I) can be lowered from 1/2 x 2-Inch bolts (J) in
mounting angles.
9. Roll tractor backward off of the snowblower.
10.Remove both left hand and right hand mounting angles
(K) from tractor. Replace hardware (L) into holes of
mounting angles for storage.
11.Front axle bracket (M) and spring anchor bracket may
be left mounted to tractor is desired.
12.Remove any weights that were installed when preparing
the tractor.
J
I
M95942
M95931
K
L
M
c
CAUTION: Avoid injury! When the snowblower
is removed, remove any weights that were
added to the tractor.