Operating, Before operating snowblower, Daily operating checklist – John Deere OMGX10742 J9 User Manual
Page 20: Controls and adjustment levers, Snowblowing tips, Stopping tractor and snowblower
Operating - 16
OPERATING
Operating
Before Operating Snowblower
•
Learn all controls and how they work. Read your
Tractor's Operator Manual, if necessary.
•
STOP engine.
•
LOCK park brake.
•
Remove key.
•
Make operating adjustments as necessary.
•
Tighten loose hardware.
Daily Operating Checklist
Check snowblower for loose fasteners.
Lubricate discharge chute.
Controls and Adjustment Levers
A - Snow Deflector
B - Snow Deflector Control Handle
C - Snowblower Lift Handle
D - Attachment Clutch Lever
E - Chute Control Rod
F - Lift Assist Springs
G - Skid Shoes
H - Scraper
I - Snow Augers
J - Auger Housing
K - Discharge Chute
Snowblowing Tips
Install tire chains and rear weights on tractor.
Adjust runners before you clear snow.
Operate snowblower at full throttle.
Operate snowblower at safe, SLOW travel speed.
Slow down:
•
On slopes.
•
When you make turns.
•
When you throw snow close to buildings or trees.
Always transport with the snowblower in the RAISED
position and the attachment clutch lever DISENGAGED.
Throw snow downwind, if possible.
If you hit an object:
•
STOP snowblower immediately.
•
Fix damage before you use snowblower again.
Before you clean or unplug snowblower:
•
Move attachment clutch lever to the DISENGAGED
position.
•
STOP engine.
•
Remove key.
•
LOCK park brake.
•
Wait for ALL moving parts to STOP.
•
Lower snowblower to the ground.
•
Remove spark plug wires.
•
Clean snowblower after you use it.
Stopping Tractor and Snowblower
When stopping tractor, do the following:
1. Depress clutch/brake pedal fully.
2. Put transmission in NEUTRAL position.
E
F
G
I
H
J
K
A
B
C
D