John Deere ET-3410-J - Manual (Page 21)

Metal Cutting Saw Operator's Manual 21
Accessories
ACCESSORIES:
WARNING: ACCESSORIES FOR THIS POWER TOOL ARE MENTIONED IN THIS INSTRUCTION
MANUAL. THE USE OF ANY OTHER ATTACHMENT OR ACCESSORY CAN BE
DANGEROUS AND COULD CAUSE INJURY OR MECHANICAL DAMAGE.
Part # Application
AT-4423-J Mild steel cutting (solid plate or bar, 5/16" / 8 mm maximum)
180 mm x 2.0 mm x 36 teeth
AT-4424-J Aluminum cutting (solid plate or bar, 3/8" / 9.5 mm maximum)
180 mm x 1.8 mm x 48 teeth
AT-4425-J Stainless steel cutting (solid plate or bar, 1/4" / 6 mm maximum)
180 mm x 1.8 mm x 48 teeth
NOTE: Accessories are subject to change without any obligation on the part of JOHN DEERE.