JVC XL-MC222BK - Manual (Page 10)

8
XL-MC222BK
?????
CONTINUE MODE PLAYBACK
Every loaded disc can be played entirely in the numerical order in
the CONTINUE mode. After the playback of the last disc ends,
the playback begins from the first disc.
Discs and tracks can be selected randomly from all the loaded discs
and played (RANDOM function).
One track can be played repeatedly in the basic mode as well as
when the RANDOM function is selected (REPEAT-1 function).
The beginning of the first track of every loaded disc can be played
for 15 seconds (INTRO function).
Basic mode
1. Select the mode.
Use the PLAY MODE button, or press the CONTINUE button
on the remote control, showing “CONTINUE” on the display.
Playing discs in random order
To play every disc in the storage in random order press the
RANDOM button showing “RANDOM” on the display. Then start
the disc.
Playback order is continuous and discs and tracks are randomly
selected. There is an approximately fifteen second pause between
tracks.
Press the RANDOM button again while playback is stopped to
cancel the function, clearing the indication from the display.
Playing a track repeatedly
A track of the selected disc can be played repeatedly. With a disc
selected, press the REPEAT button, and select and show “REPEAT
1” on the display. Then start the disc to play the selected track
repeatedly until you stop it.
This function can be used in the basic CONTINUE mode as well
as when the RANDOM function is on.
Press the REPEAT button once to cancel the function, clearing the
indication from the display.
NOTE: The REPEAT function is not available in the CON-
TINUE mode, as all discs are already being played
back continuously.
Playing the beginning part of first
tracks
To scan the first tracks of all discs, press the INTRO button to
show “INTRO” on the display. The beginning part of the first track
of each disc will be played for 15 seconds successively.
Press the INTRO button again to cancel the function, clearing the
indication from the display. This function will continue until the
button is pressed.
2. Select a disc you want to start playing. The discs following the
specified disc will be played continuously.
Press the DISC button and then use the DISC/TRACK jog dial.
Or use the – or + button or numeric buttons.
DISC
3. Select the track if you want to start playing the disc from a
specific track.
Press the TRACK button and then use the DISC/TRACK jog
dial. Or use the
or button or numeric buttons.
4. Press the PLAY/PAUSE button or the button to start playing.
5. Discs and tracks can be skipped forward or backward during
the playback using the or buttons. The playback can
be paused or stopped in the normal manner. For further
information, see [BASIC OPERATION] on pages 6 and 7.
PLAY MODE
or
CONTINUE
(Remote control)
XL-MC222/E B 97.7.15, 5:58 PM 8