Common operations, Setting the clock, Turning on the power and selecting the sources – JVC CA-MXJ75R User Manual

Page 15

Advertising
background image

– 10 –

English

Common Operations

Setting the Clock

Before operating the unit any further, first set the clock built
in this unit.

1

Press PANEL OPEN/CLOSE.

The unit is turned on and the Powered Rolling
Panel opens automatically.

2

Press TIMER/CLOCK.

The hour digits start flashing on the display.

3

Press

4 or ¢ to adjust the

hour, then press SET.

• If you want to correct the hour after pressing

SET, press CANCEL. The hour digits start
flashing again.

4

Press

4 or ¢ to adjust the

minute, then press SET.

To adjust the clock again

If you have adjusted the clock before, you need to press
TIMER/CLOCK repeatedly until the clock setting mode is
selected.
• Each time you press the button, the timer/clock setting

modes change as follows:

If there is a power failure

The clock loses the setting and is reset to “0:00.” You need to set the
clock again.

Turning On the Power and Selecting the
Sources

When you press the play button for a particular source (FM/
AM, CD

6, AUX, and TAPE 2 3), the unit turns on, and

the Powered Rolling Panel opens automatically (and the unit
starts playing the source if it is ready — COMPU PLAY
CONTROL).

To listen to the FM/AM (MW/LW) broadcasts, press FM/
AM. (See pages 13 – 15.)
To play back CDs, press CD

6. (See pages 16 – 18.)

To play back tapes, press TAPE

2 3. (See page 19.)

To select the external equipment as the source, press AUX.

To turn on the unit without playing, press
so that the STANDBY lamp goes off.

The Powered Rolling Panel opens automatically.

To turn off the unit (on standby), press
again so that the STANDBY lamp lights up.
The Powered Rolling Panel also closes.
A little power is always consumed even while the
unit is on standby.

To switch off the power supply completely, unplug the AC
power cord from the AC outlet.

When you unplug the AC power cord or if a power
failure occurs

The clock is reset to “0:00” right away, while the tuner preset
stations (see page 13) will be erased in a few days.

TIMER
/CLOCK

DAILY

Canceled

ON TIME

ON TIME

Clock

setting

(The hour digits start flashing.)

REC

FM AM

/

C D

TAPE

AUX

PANEL

OPEN / CLOSE

SET

SEA CONTROL

SET

SEA CONTROL

PRESET

PRESET

STANDBY

STANDBY

Continued

EN10-15.MXJ75R[E]/3

99.3.25, 6:46 PM

10

Advertising