Playing back cds, Loading cds, Playing back the entire discs — continuous play – JVC CA-MXJ75R User Manual

Page 21: Basic cd operations

Advertising
background image

– 16 –

English

Playing Back CDs

Loading CDs

1

Press

0 for the disc tray (CD 1 to

3) you want to load a CD onto.

The unit automatically turns on and the disc
tray comes out. The Powered Rolling Panel
also opens automatically.

2

Place a disc correctly on the circle of the disc
tray, with its label side up.

• When using a CD single (8 cm), place it on the inner

circle of the disc tray.

3

Press the same

0 you have pressed

in step 1.

The disc tray closes, and the corresponding
disc number indicator (CD 1 to CD 3) lights
up on the display.

4

Repeat steps 1 to 3 to place other CDs.

When loading more than one CD continuously

When you press

0 for the next tray you want to place another CD

onto, the first disc tray automatically closes and then the next tray
comes out.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

• The disc marker lights up for the disc number you have selected.
• The disc indicator flashes while the corresponding CD is being

played.

• The disc indicator goes off when the unit has detected that there is

no CD on the corresponding disc tray.

Playing Back the Entire Discs — Continuous
Play

You can play CDs continuously.

1

Load CDs.

2

Press one of the disc number
buttons (CD 1, CD 2, and CD 3)
for the disc you want to play.

CD play starts from the first track of the
selected disc.

• Pressing CD

6 instead of the disc number buttons

starts playing back if a CD is on the trays.

To stop during play, press

7.

To remove the disc, press

0 for the corresponding disc tray.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of
the following sequences.
• When CD 1 is pressed : CD 1

] CD 2 ] CD 3 (then stops)

• When CD 2 is pressed : CD 2

] CD 3 ] CD 1 (then stops)

• When CD 3 is pressed : CD 3

] CD 1 ] CD 2 (then stops)

* When only 2 CDs are loaded, they are played in the same order,

but the disc tray without a CD is skipped.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press

0 corresponding to a CD, not playing or selected

currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not
stop until all CDs you have exchanged are played.

To stop play for a moment

Press CD

6.

While pausing, the elapsed playing time flashes
on the display.

To resume play, press CD

6 again.

CD

1

CD

2

CD

3

Track number

Elapsed playing time

C D

CORRECT

INCORRECT

Disc marker

2

3

1

1
5
9

13

2
6

10
14

3
7

11

4
8

12

Tracks of the currently
playing disc

2

3

1

Disc number

Disc indicator

Continued

EN16-19.MXJ75R[E]/3

99.3.25, 6:47 PM

16

Advertising