JVC XV-NP10S - Manual (Page 7)

5
XV-NP10S/LET0246-003A/English
P
rep
ara
ti
o
ns
Preparations
Connections
Before using the player, connect the player to a TV and/or
amplifier.
Before making connections
• Do not connect the AC power cord until all other
connections have been made.
• Connect VIDEO OUT of the player directly to the video
input of your TV. Connecting VIDEO OUT of the player to a
TV via a VCR may cause a monitor problem when playing
back a copy-protected disc. You may also have a monitor
problem when connecting the player to an integrated TV/
Video system.
Connecting to a TV
The following sections A to D describe TV connections where
only a TV is connected to the player so that you will hear sound
from the TV.
A Connecting to a TV with the SCART connector
You can enjoy using the player by simply connecting it to your
television set with a 21-pin SCART cable.
NOTES
• Do not connect multiple devices using multiple connectors.
• When you connect a SCART cable, do not connect any other
cables to other video signal output jacks (VIDEO/S-VIDEO/
COMPONENT VIDEO OUT). If you do so, you will not be able
to obtain correct signals from the SCART connector of the
player.
• In the following description, “TV” may be substituted with
“monitor” or “projector.”
• Terminal names used for other components may be different
from those used in the following description.
RIG HT
LEF T
AUDIO
VIDEO
S-VIDEO
IN
IN
RIGH T
LEFT
COA XIAL
OPT ICAL
PCM/STREAM
DIG ITAL OU T
AUD IO O UT
VIDE O
S-VID EO
Y
P B
P R
VIDE O OU T
COM PON ENT
AV O UT COM PON ENT
/ CO MPO SITE
S-VID EO Y /C RGB / CO MPO SITE
COMPONENT
/ COMPOSITE
S-VIDEO Y / C
RGB / COMPOSITE
COMPONENT
/ COMPOSITE
S-VIDEO Y / C
RGB / COMPOSITE
COMPONENT
/ COMPOSITE
S-VIDEO Y / C
RGB / COMPOSITE
COMPONENT
/ COMPOSITE
S-VIDEO Y / C
RGB / COMPOSITE
SCART cable (not supplied)
Set the selector correctly according to your TV.
• If your TV only accommodates the composite video
signal:
Set the selector to “COMPONENT/COMPOSITE” or
“RGB/COMPOSITE.”
or
• If your TV accommodates
Y/C signals:
Set the selector to “S-
VIDEO Y/C.”
• If your TV accommodates
RGB signals:
Set the selector to “RGB/
COMPOSITE.”
• If your TV accommodates both RGB and Y/C, set the
selector to “RGB/COMPOSITE.” Otherwise the picture
cannot be displayed correctly.
XV-NP10[B].book Page 5 Wednesday, April 28, 2004 10:08 PM