JVC HD-70A478 - Manual (Page 25)

25
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
è To choose MANUAL
† To TIME
è To set the hour
† To minute
è To set the minute
† To TIME ZONE
è To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
† To move to D.S.T. (Daylight Savings Time)
è To turn D.S.T. ON or OFF
† To START CLOCK
Manual Clock Set
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Quick Setup
Before you use any of your TV’s timer functions, you must first set the clock. You may
precisely set your clock using the XDS time signal broadcast by most public analog
broadcasting stations. If you do not have this in your area, you will have to set the clock
manually. See manual clock set below. To set the clock using the XDS signal:
è To choose AUTO
† To TIME ZONE
è To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
† To move to D.S.T. (Daylight Savings Time)
è To turn D.S.T. ON or OFF
† To NEXT (To Auto Tuner Setup)
Notes:
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.
• Only when the MODE is set to AUTO, the Daylight Saving Time feature automatically adjusts
your TV’s clock for Daylight Saving.
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and
receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Auto Clock Set
(To be continued...)
SET CLOCK
SELECT OPERATE EXIT MENU
TIME
MODE
TIME ZONE
D.S.T.
MANUAL
-- : -- --
ATLANTIC
ON
START CLOCK
SET CLOCK
NEXT
SELECT OPERATE EXIT MENU
TIME -- : -- --
MODE
TIME ZONE
D.S.T.
AUTO
ATLANTIC
ON
LCT2063-001E-A ENG.indd 25 LCT2063-001E-A ENG.indd 25 5/25/07 9:11:46 AM 5/25/07 9:11:46 AM