JVC KD-S51 - Manual (Page 19)

19
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
* 1 Displayed only when “L/O MODE” is
set to “WOOFER” (see page 21).
Ex.: When “TRE” is selected
2
Indication pattern changes as
you adjust the level.
Indication To do: Range
BAS* 2
(bass)
Adjust the bass. –06 (min.)
to
+06 (max.)
TRE* 2
(treble)
Adjust the treble. –06 (min.)
to
+06 (max.)
FAD* 3, * 7
(fader)
Adjust the front
and rear speaker
balance. R06 (Rear
only)
to
F06 (Front
only)
BAL* 7
(balance)
Adjust the left
and right speaker
balance. L06 (Left
only)
to
R06 (Right
only)
LOUD* 2
(loudness)
Boost low and
high frequencies
to produce a well-
balanced sound at
low volume level. LOUD ON
J
LOUD
OFF
SUB. W* 4
(subwoofer)
Adjust the
subwoofer output
level. 00 (min.)
to
08 (max.)
VOL* 5
(volume)
Adjust the
volume. 00 (min.)
to
30 or 50
(max.)*
6
* 2 When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
* 3 If you are using a two-speaker system, set
the fader level to “00.”
* 4 This takes effect only when a subwoofer is
connected.
* 5 Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
* 6 Depending on the amplifier gain control
setting. (See page 22 for details.)
* 7 This adjustment cannot affect the subwoofer
output.
EN18-23_KD-S51[J]f.indd 19 EN18-23_KD-S51[J]f.indd 19 11/3/04 9:58:08 AM 11/3/04 9:58:08 AM