Jabra SP-CEIL-012 - Manual (Page 9)

SP-CEIL-012
Installation Manual Page - 9 -
Mount Installation
1. Invert the projector and place it on a soft and flat
surface. Locate the three (3) 6 (mm) mounting
points found on the bottom of the projector.
2. Secure the mounting bracket using the three (3) 6
(mm) x 12 (mm) Phillip Head screws (supplied).
3. Do not over tighten the screws!
Figure 5
1. Install the base box securely to the ceiling
structure in accordance with proper commercial
standards. Use (commercially available) suitable
hardware depending on the installation
requirements.
NOTE: If an extension adapter is to be used,
InFocus has a variety of different
adapters that can be purchased. Please
contact Customer Service.
Figure 6