System connections, Connection to a personal computer, A] using usb cable – JVC 0503-FO-ID-VP User Manual

Page 67: B] using i.link cable

Advertising
background image

EN

67

Master Page: Right-Heading0

SYSTEM CONNECTIONS

[A] Using USB cable

It is possible to do the following things:

● Transfer still images stored on a memory card to a

PC.

● Use this camcorder as a WebCam. (੬ pg. 68)

[B] Using i.LINK cable

It is also possible to transfer still/moving images to a
PC with an i.LINK connector by using the provided
software, software equipped with the PC or
commercially available software.

NOTES:

● Refer to “SOFTWARE INSTALLATION AND USB

CONNECTION GUIDE” for the installation of the
bundled software and drivers.

● The software operation manual is provided as PDF

file on the CD-ROM.

● It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the
battery pack. (

੬ pg. 13)

● Never connect the USB cable and the i.LINK

cable simultaneously to the camcorder. Connect
only the cable you wish to use to the camcorder.

● When using an i.LINK cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U
i.LINK cable depending on the type of i.LINK
connector (4 or 6 pins) on the PC.

● If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not
enter the USB mode.

● The date/time information cannot be captured into

the PC.

● Refer to the instruction manuals of the PC and

Software.

● The still images can also be transferred to a PC

with an i.LINK connector-equipped capture board.

● The system may not work properly depending on

the PC or capture board you are using.

Connection To A Personal Computer

[A] Using USB cable

To USB

PC

PC with i.LINK

connector

USB cable (provided)

To i.LINK IN/OUT

[B] Using i.LINK cable

To USB connector

To i.LINK

connector

i.LINK cable

(optional)

OR

“USB MODE” and/or “ACCESSING FILES”
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.

AD

V

A

NCED FE

A

TURE

S

GR-HD1US_07Advanced.fm Page 67 Thursday, April 24, 2003 5:14 PM

Advertising