JVC HD-52G886 - Manual (Page 61)

61
Picture Adjust
With digital noise clear, this helps take our static or noise from a channel that may not be
coming in clearly.
Press the M ENU button
π† To DIG. NOISE CLEAR
è To enter
π† To select the mode LOW, HIGH, AUTO or OFF
Press the M ENU button when finished
Note:
• "AUTO" can only be displayed when you have NTSC and 480i picture signal being inputted.
Digital Noise Clear
DIG. NOISE CLEAR
OFF
LOW
HIGH
AUTO
Color Management
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated
to produce natural hues.
Press the M ENU button
π† To COLOR MANAGEMENT
è To enter
π† To select the mode “ON" or "OFF"
Press the M ENU button when finished
COLOR MANAGEMENT
ON
OFF
Dynamic Gamma
JVC's Dynamic Gamma Circuitry (DGC makes it easier to see dark areas when a picture has
many dark areas, and makes it easier to see the bright areas when a picture has many bright
areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness
balance, especially in dark areas where the level of grayscale is often lost, turning completely
to black DGC automatically enhances the detail in these dark areas providing a more dynamic
image with fi ner detail, so the optimum picture settings are automatically set for each picture.
Normally use with DGC on.
Press the M ENU button
π† To DYNAMIC GAMMA
è To enter
π† To turn ON or OFF
Press the M ENU button when finished
DYNAMIC GAMMA
ON
OFF
LCT1866-001A-A ENG 61 5/12/05, 11:17:05 AM