JVC KW-AVX820 - Manual (Page 42)

42
ENGLISH
When a call comes in...
The source is changed to “ Bluetooth” automatically.
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
(
27)
Using the Bluetooth cellular phone
When <Auto Answer> is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
or VOL +/–).
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
or VOL +/–).
• You can adjust the microphone volume, 28.
~
Press [SOURCE], then press [BLUETOOTH].
Ÿ
Press [ ] or MENU.
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu). ( 25 – 28)
To make a call, use < Dial Menu >. ( 25)
Name and phone number (if acquired)
FLAT Connected Device Name
Current Track Title
Artist Name
Album Title
Status of the device
• Signal strength/Battery remainder (only when
the information comes from the device).
Connected device name
• or appears
depending on the device
connected.
• When no audio device is
connected, “No Audio
Device” appears.
Activates < Voice Dialing >
function. (Hold)
• To cancel <
Voice Dialing >,
hold any button on the
monitor panel (except
or VOL +/–).
• Displays < Dial Menu > screen.
• Displays < Redial > menu. (Hold)
Bluetooth icon
• Turns blue when a Bluetooth device is
connected.
EN_KW-AVX820[J].indb 42 EN_KW-AVX820[J].indb 42 09.1.12 1:17:58 PM 09.1.12 1:17:58 PM