JVC TK-C215VP4 - Manual (Page 14)

10
Introduction
Camera (continued)
G Base
Mount the base to the ceiling, wall or electrical
box before mounting the camera.
(
A Pg. 17)(A Pg. 25)
H Fastening Screw for Dome Cover
This is a fastening screw for the dome cover.
Use a supplied wrench to fasten/unfasten the
screw.
I AC 24 V/DC 12 V Power Supply Wire
DC 12 V Input: Red (+12 V), Black (GND)
AC 24 V Input: Nonpolar
Note:
● To mount a heater (sold separately: KA-
ZH215) to this unit, make sure to connect to
an AC 24 V supply during use.
● The AC 24 V power supply should conform to
the following:
U-type: Class 2 only
E-type: Isolated power supply only
● For inquiries on the heater, consult your
nearby JVC dealer.
J Protection Cover
Upon connecting the coaxial cable, protect it by
insulating the metal part of the BNC connector
K from the ceiling structure.
K Video signal output connector (BNC)
( A Pg. 15)
Name of Parts (continued)
G
K
J
I
H
TK-C215VP4_JP.book Page 10 Wednesday, September 20, 2006 5:48 PM