JVC TK-C215VP4 - Manual (Page 13)

9
Camera
A Mounting hole ן 2
Use these when mounting the camera to the
ceiling, wall or electrical box.
(
A Pg. 17)(A Pg. 25)
Note:
● To mount the camera using the electrical box,
consult the dealer from which this product is
purchased or any nearby JVC dealer.
B Hole for Connecting Cable and Piping
This is a hole for drawing out the connecting
cable.
This hole can also be used to mount directly to
pipes. (Piping hole: G3/4-14UNC)
(
A Pg. 26)
C Mounting Screw for Fall Prevention Wire
Use this screw when mounting the fall prevention
wire to this unit. (Fall prevention wire is not
supplied with this product.)
Note:
● Connect the fall prevention wire to prevent
this unit from falling accidentally. The camera
unit may fall if this wire is not connected.
D Dome Cover
E Inner Dome
Set the switches as well as angle of view before
mounting the camera. (
A Pg. 17)
F Plug for Piping Hole and Piping Hole
(Side)
Use this plug when mounting directly to pipes
from the side. The plug for piping hole is
mounted to this hole by default. (
A Pg. 27)
Name of Parts
B
D
C
F
E
A
TK-C215VP4_JP.book Page 9 Wednesday, September 20, 2006 5:48 PM