JVC AV 24F702 - Manual (Page 15)

15
– 0 9
+
• • • A Z
SPACE
• • •
CH LABEL
You can labal every channel up to 4 characters.
Channel labels will appear over the channel number display each time you select a channel.
TO MEMORIZE CHANNELS
(CONTINUED)
Press the EXIT button.
1
2
Select a channel you want to label by pressing
the 10-key pad or CH + or - button.
Press the MENU button.
3
4
6
Press the CH + ( ▲ ) or – ( ▼ ) button until the indicator
Press the CH + ( ▲ ) or – ( ▼ ) button until the indicator
Press the VOL + ( ) or – ( ) button to select "SET" 5
7
8
9
10
Go to step 7 when you select the "SET".
Go to step 9 when you select the "CLEAR".
Now the bar for the first space is flashing. Press the
Repeat step 7 to enter the rest of the characters
from second to fourth.
Press the ENTER button to register.
LANGUAGE / IDIOMA / LANGUE
CH SET-UP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
▲ / ▼ / ENTER / MENU / EXIT
next to "CH SET-UP" begins to
flash, then press the ENTER
button.
AUTO CH MEMORY
CH SET-UP
ADD / DELETE
CH LABEL
▲ / ▼ / ENTER / MENU / EXIT
TV CATV
next to "CH LABEL" begins to
flash, then press the ENTER
button.
LABEL - - - -
SET/CLEAR
SET CLEAR
CH LABEL : CH 012
▲ / ▼ / / /ENTER / MENU / EXIT ▼▼
▼
or "CLEAR". Select "SET" in case
you have a channel to label or
change. Select "CLEAR" in case
you have a channel to delete.
Then press the ENTER button.
VOL + ( ) or – ( ) button to
enter a character in the first
space. Press the button
repeatedly until the character
you want appears on the
screen. Then press the ENTER
button.
LABEL - - - -
SET/CLEAR
SET
CH LABEL : CH 012
▲ / ▼ / / /ENTER / MENU / EXIT ▼▼
▼
NOTE:
The character will change as below.