JVC AV 24F702 - Manual (Page 7)

7
CHANGING THE BATTERIES
Push down on the remote’s back cover and slide towards the
bottom to remove it.
Insert two AA batteries (supplied), carefully noting the “+” and “–”
markings on the batteries and on the remote control. To avoid a
potential short circuit, insert the “–” end first.
Be sure to use only size AA batteries.
When batteries are installed, slide the cover back into place (until it
clicks into position).
• If the remote control acts erratically, replace the batteries. Typical
battery life is six months to one year. We recommend using
alkaline batteries for longer battery life.
When you change the batteries, try to complete the task within
three minutes. If you take longer than three minutes, the remote
control codes for your VCR, DVD, and/or Cable Box may have to
be reset (pages 8-10).
• Before you can operate the remote control, you must first install
the batteries (included). See “Changing the Batteries” on this
page above for instructions. (For an illustration, please see page 6.)
• Press the POWER button to turn the television on or off.
• Make sure the TV/CATV switch is set to TV. Move the switch to
CATV only if you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR,
slide to DVD to control a DVD player. Please see pages 8 to 10
for instructions on programming your remote control to operate a
Cable box, VCR or DVD player.
• Press the CH + and CH – buttons to scan through the channels.
Tap the CH + or CH – button to move through the channels one
channel at a time.
• Press VOL + or VOL – to raise or lower the volume. An indicator
bar will appear onscreen to show you the television volume level.
• The CH +/– and VOL +/– buttons are also used to navigate JVC’s
onscreen menu system.
• You can directly access specific channels using the 10-key pad.
• This remote includes illuminated buttons for key features like CH
+/– buttons, and VOL +/– buttons. Press the LIGHT button to turn
the illumination on.
POWER
RM-C309G
1 2 3
DISPLAY
MUTING
MENU
VCR CHANNEL
PREV NEXT
REC STOP PAUSE
EXIT
ENTER
7 8 9
4 5 6
+
CH
VOL VOL
+
CH
PLAY FF REW
SLEEP TIMER
0 RETURN
LIGHT
TV CATV
TV/VCR
VCR /DVD
POWER
DVD VCR
STILL/PAUSE OPEN/CLOSE
TV
STANDARD
INPUT
C.C. AUDIO SELECT
BBE
REMOTE CONTROL BASICS