JVC AV28CH1EU - Manual (Page 25)

Using the TV’s menu
23
ENGLISH
AV32/28X25EU / AV32/28H20EU / AV28CH1EU / LCT1142-001A-U / English
To cancel the S-IN (S-VIDEO input)
setting:
Press the yellow button and turn off S-IN
(S-VIDEO input) mark. The regular video
signal (composite signal) pictures are
resumed.
• The EXT-1 terminal does not support
S-VIDEO signal (Y/C signal) and you
cannot set S-IN (S-VIDEO input) in
the EXT-1 terminal.
• Setting S-IN (S-VIDEO input)
changes the head character from “E” to
“S”. For example, “E2” is changed to
“S2”.
• Even a device which enables the S-
VIDEO signal (Y/C signal) to be
output may output a regular video
signal (composite signal) depending
on the device setting. If a picture
cannot appear because S-IN (S-
VIDEO input) setting has been made,
read the device Instruction Manual
carefully again to check for the device
settings.
„ ID LIST
You can have a name corresponding to the
devices connected for each EXT terminal.
Giving a name to an EXT terminal makes the
EXT terminal number appear on the screen,
together with the name.
1 Choose an EXT terminal
2 Press the blue button to display the
name list (ID LIST)
3 Press the 6 6 6 6 buttons to choose a
name. Then press the a a a a button
The ID LIST disappears and the name is
assigned to the EXT terminal.
• You cannot assign an EXT terminal
name not found in the name list (ID
LIST).
To erase a name assigned to the
EXT terminal:
Choose a blank space.
4 Press the a a a a button to complete
the setting
„ DUBBING
You can choose a signal source to be output
from an EXT-2 terminal.
You can choose any one of the output signal
of the device connected to the EXT terminal
and the picture and sound from a TV channel
you are currently viewing to output it to the
EXT-2 terminal.
1 Press the 5 5 5 5 buttons to choose
the arrow from the menu
2 Press the 6 6 6 6 buttons to choose an
EXT terminal or TV.
Then press the a a a a button
The arrow in the menu represents a signal
flow. The left side of the arrow denotes a
signal source output from the EXT-2
terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected
to an EXT terminal passes through the TV
and is output from the EXT-2 terminal.
TV:
The picture and sound of the TV channel
you are currently viewing are output from
the EXT-2 terminal.
EXT-1
EXT-3
BACK
EXT SETTING
TV OK
DUBBING
EXT-2
EXT-4
TV
D0021-EN
ID LIST
VHS
S-VHS
DVC
SAT
STB
GAME
LD
DVD
8mm
Hi-8
EXT-1
BACK
EXT SETTING
TV OK
DUBBING
EXT-2
EXT-4
TV
D0022-EN
EXT-3
AV32&28H20EU_Eng.fm Page 23 Wednesday, March 13, 2002 12:07 PM