JVC AV28CH1EU - Manual (Page 28)

26
Using the TV’s menu
AV32/28X25EU / AV32/28H20EU / AV28CH1EU / LCT1142-001A-U / English
2 Press the h h h h (Information) button to
display “ID NO.” (ID NO. input
screen).
3 Press the Number buttons to enter
the ID number
The lock is temporarily released so you
can view the TV channel.
If you have forgotten the ID
number:
Perform step 1 of “To set the CHILD
LOCK function”. After confirming the ID
number, press the b button to exit the
menu.
• Even if you reset the lock temporarily,
it does not mean that the CHILD
LOCK function set for the TV channel
is cancelled. The next time anyone
attempts to view the TV channel, it
will be locked again.
• When you would like to cancel the
CHILD LOCK function, you must
perform the operation “To set the
CHILD LOCK function” again.
• To disable easy choosing of a
Programme number (PR) in which a
locked TV channel has been
registered, the Programme number
(PR) has been set that it cannot be
chosen by the 6 buttons or the
operation buttons at the TV.
• To disable easy resetting of the lock,
“ID NO.” (ID NO. input screen) is set
so that it cannot appear unless you
press the h (Information) button.
„ DECODER (EXT-2)
Only when connecting a Decoder with a T-V
LINK compatible VCR connected to the
EXT-2 terminal, you can use this function.
To operate this function, see “Using the
DECODER (EXT-2) function” on page 35.
Caution
• If you have not connected a Decoder with
a T-V LINK compatible VCR connected to
the EXT-2 terminal, setting this function to
“ON” by mistake causes the picture/
sound of a TV channel you are currently
viewing not to be issued.
5
ID NO . :
D0028-EN
AV32&28H20EU_Eng.fm Page 26 Wednesday, February 20, 2002 2:04 PM