Jet Tools JOVS-10 User Manual

Jet Tools Grinding machines

Advertising
background image




JET JOVS-10 Oscillating Spindle Sander

Oscillating spindle sanders have a unique set of capabilities that
make sanding odd-shaped work pieces easy and accurate. The JET
JOVS-10 Oscillating Spindle Sander packs those capabilities and
more into one tough machine with the capacity, power and
reliability you expect from the JET brand.

Solid Base and Power

The JET 1HP motor

and the oil bath case

make the work and

gear mechanism

strong, smooth and

reliable.


The all steel base cabinet gives the JET JOVS-10 Oscillating Spindle
Sander a solid footing and puts the table surface at a comfortable 39”
above the floor. It also encloses the heavy-duty 1HP, 1Ph, 115V TEFC
(totally enclosed, fan cooled) motor. The motor is mounted directly to
the worm and heavy gear mechanism that generates the 75 oscillations
per minute while turning the spindle at a consistent 1725-RPM. The
gear and worm drive run in an oil bath that insures many years of
smooth, quiet and dependable operation.

An industrial-style pushbutton switch set is mounted on the front of the
cabinet to be within easy reach. The guarded On switch helps prevent
accidental starts. Storage racks on either side of the base cabinet keep
the spindle assemblies and inserts organized and close at hand. A large
door on the rear of the cabinet provides ample access to the motor and
drive housings.


Spindles and Support

The JET JOVS-10 Oscillating Spindle Sander comes with a
complete set of 10 spindles and abrasive sleeves so you have the
tooling you need to get to work right out of the box! Spindle sizes
included are ¼” X 5” (steel), 3/8” X 6” (steel), ½” X 6” (steel),
5/8” X 6” (steel), ¾” X 9” (steel), 1” X 9” (rubber), 1 ½” X 9”
(rubber), 2” X 9” (rubber), 3” X 9” (rubber), 4” X9” (rubber).
Each spindle comes with one abrasive sleeve.

We include a full set of

10 spindles to handle all

of your sanding jobs!


Because nearly all of our sanding spindles and sleeves remain above the table, it is
possible to sand thick material without having to flip the piece over during sanding. That
makes sanding faster and far more accurate. That above table length also allows sanding
multiple pieces at the same time, making that once tedious process fast and accurate.


Advertising