Jet Tools JOVS-10 - Manual (Page 2)

Due to the oversized length of the sanding spindles users
are capable of removing the sanding sleeves and flipping
them end for end, utilizing the whole sanding sleeve
before finding a need to replace them.
Just below the table is the main spindle drive and support
mechanism. The 1-1/2" oscillating action produced by
this mechanism reduces the buildup of friction-based heat
to protect the wood and prolong the abrasive sleeve life.
The main spindle support runs on precision ball bearings for smooth, trouble-free
operation.
The length of our spindles and
abrasive sleeves means you can often
turn the sleeves end for end to double
their life!
We also made installing or changing the spindles fast and easy while insuring proper
alignment and secure mounting. Each spindle has a tapered arbor with a threaded end that
draws it into the precision-machined arbor housing. Wrenches are included for installing
or removing spindles.
Tilting Table
To further
extend the
capabilities of
the JET JOVS-
10 Oscillating
Spindle Sander
we gave it a
generous 24”
by 24” cast iron
table that
makes working
with large work
pieces easy and
safe. That table
also tilts
(forward) up to 45 degrees and can be locked at any point to handle virtually any bevel
sanding operation. An adjustable stop makes returning the table to the horizontal position
fast and accurate.
The large cast iron table tilts to 45-degrees (left) and the specially shaped insert openings
(right) help keep the gap between them and the spindle to a minimum at any angle.
The center hole of the JET JOVS-10 Oscillating Spindle Sander table has a large 6 1/8”-
diameter opening for using the larger sanding sleeves even with the table tilted. We
include three snap-in inserts with 3 ¼”, 2 1/8” and 1 ½” openings (at the narrowest point)
that help stabilize the work piece close to the sanding drum. The specially shaped insert