JVC GR-DVL365 - Manual (Page 59)

EN
59
DISPLAY
MAKE CONNECTIONS
Also refer to pg. 22 and 23.
1
A JVC VCR equipped with a remote
pause connector . . .
..... connect the editing cable to the Remote PAUSE
connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an
R.A.EDIT connector . . .
..... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
..... connect the editing cable to the remote control’s
PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
VIDEO/MEMORY Switch to “VIDEO” (GR-DVL867/
DVL865/DVL767/DVL765/DVL567/DVL367/DVL365
only), then set the Power Switch to “PLAY” while
pressing down the Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape
and engage the AUX mode (refer to the VCR’s
instructions).
NOTES:
● Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen (
੬
pg. 50).
Or, press DISPLAY on the remote control
(provided) to turn on/off the date indication.
• Time Code
..... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (
੬
pg. 50).
• Playback Sound Mode, Tape Speed And Tape Running
Displays
..... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu
Screen (
੬
pg. 50).
● Set the video out select switch of the cable adapter as
required:
Y/C
: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video
cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
● When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
To Remote
PAUSE or R.A.EDIT
To PAUSE IN
Editing cable
(provided)
S-Video cable
(optional)
Audio/Video cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
*** JLIP : GR-DVL167/DVL160
EDIT : GR-DVL867/DVL865/DVL767/DVL765/
DVL567/DVL367/DVL365
Connector cover**
To AV
To JLIP***
or EDIT*** To S-VIDEO
To AUDIO,
VIDEO*
and
-IN
connectors
“Y/C”/“CVBS”
video out
select switch
If your VCR has the
SCART connector,
use the provided
cable adapter.
For GR-DVL167/DVL160 Owners:
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the core
filter (plug which has 3 rings around the pin) to
the camcorder.
VCR
TV