JVC TK-WD310 - Manual (Page 3)

2
Thank you for purchasing this product.
(These instrustions are for TK-WD310U and TK-WD310E.)
Before beginning to operate this unit, please read the instruction
manual carefully in order to make sure that the best possible perfor-
mance is obtained.
Features
Ⅵ Backlight compensation over a wide area is realized by the 14-bit Wide
Dynamic Range feature.
The Wide Dynamic Range feature controls the exposure time using a
maximum of 5 sampling timing for the image within a single screen.
Even when shooting in areas with large difference in lightning, subjects
with difference in brightness can be viewed in a clear and natural state.
Ⅵ 1/3-inch high-resolution DPS device adopted as shooting element to
realize high picture quality with no smearing or blooming in areas with
high luminance. In addition, 2.5lx (during F1.2, 50%, AGC SUPER set-
ting) is realized for minimum subject brightness.
Ⅵ Horizontal resolution of 480 lines (typ.) and vertical resolution of over
400 lines allow display of finely detailed video.
Ⅵ New device adopted for use even under strong electric field conditions.
Ⅵ Compatible with CS mount and VIDEO auto iris/DC auto iris.
* When using the C mount lens, C mount adapter is required.
Ⅵ Various settings in each menu screen are possible.
Menu settings can be performed easily using single button operations.
Ⅵ 3 white balance modes of ATW, AWB and MANUAL are available.
ATW mode that adjusts the white balance automatically according to
the changes in lighting conditions (color temperature) or AWB/MANUAL
mode that automatically or manually adjusts and locks the white bal-
ance of specific lighting conditions can be selected.
Ⅵ Camera title setting and display can be made.
Ⅵ Compact design allows installation in narrow spaces.
INTRODUCTION
3
Ⅲ Before starting an important recording, be sure to perform a
test recording in order to confirm that a normal recording is
possible.
Ⅲ We do not accept liability for the loss of a recording in the
case of it becoming impossible to record due to a problem
in the video camera, VCR or video tape.
Ⅲ We do not accept liability for any damage to the camera in
cases when it is dropped because of incomplete installation
due to not observing the installation instructions correctly.
Please be careful when installing the camera.
Characters and symbols used in this instruction manual.
CAUTION : Cautionary notes concerning operation of the
unit.
MEMO : Reference such as restrictions of features, etc.
੬ : Reference page or item.
EASY INSTALLATION
The factory default settings are intended to give easy instal-
lation. Please attach a lens, a power supply, a video cable
and mount the camera securely. You should now have good
images.
The additional information contained in this handbook is intended
to give additional flexibility to more demanding installations.
4
Contents
INTRODUCTION
Features ..................................................................................... 2
Contents ..................................................................................... 4
Operating Precautions ............................................................... 5
Names and Operations of Parts ................................................. 8
CONNECTION/INSTALLATION
Basic System ........................................................................... 13
Mounting the lens ..................................................................... 14
Connections on the back .......................................................... 16
Mounting the camera ............................................................... 18
Auto iris lens adjustment .......................................................... 20
Back focus adjustment ............................................................. 22
MENU SETTING
Menu settings ........................................................................... 24
Menu tree ................................................................................. 26
About menus ............................................................................ 27
FOCUS ADJUST screen .......................................................... 27
VIDEO ADJUST screen ........................................................... 28
WDR CUSTOM SETTINGS screen ...................................... 29
MANUAL WHITE BALANCE screen ..................................... 33
CAMERA SETTINGS screen ................................................... 34
LENS ADJUST screen .......................................................... 34
CAMERA TITLE EDIT screen ............................................... 36
FACTORY SETTINGS screen .................................................. 38
OTHERS
Troubleshooting ........................................................................ 39
Speifications ............................................................................. 40
5
Operating Precautions
● To save energy, when it is not being used turn the system’s
power off.
● This camera has been designed for indoor use.
When you use it outdoors, be sure to use an appropriate housing.
● Do not install or use the camera in the following places.
• In a place exposed to rain or moisture.
• In a place with vapor or oil soot, for example in a kitchen.
• When the ambient temperature rises above or falls below the
acceptable range (from –10°C to 50°C).
• Near a source of radiation, X-rays, strong radio waves or mag-
netism.
• In a place where corrosive gasses are generated.
• In a place subject to vibration.
• In a place with excessive dirt.
● If this camera and the cables connected to this camera are used
where there are strong electromagnetic waves or where there
is magnetism present, for example near a radio or TV transmit-
ter, power transformer or an electric motor, the picture may pro-
duce noise and the colours may be affected.
● This camera incorporates an AGC circuit. As a result, when it is
used under low light conditions, the camera sensitivity is auto-
matically boosted and the picture may look uneven. However,
this is not a malfunction.
● When this camera is used in the ATW mode, the recorded
colours may be slightly different from the actual colours due to
the operational principles of the auto-tracking white balance cir-
cuit. However, this is not a malfunction.
● Hunting may occur depending on the used lens. However, this
is not a malfunction of the unit.
● The screen surroundings may appear dark depending on the
used lens.
INTRODUCTION