John Deere AT-3308-J - Manual (Page 2)

2 8-Inch Vertical Polisher Operator's Manual
Congratulations on the purchase of your new John Deere 8-Inch Vertical Polisher! You can
be assured your vertical polisher was constructed and designed with quality and perfor-
mance in mind. Each component has been rigorously tested to ensure the highest level of
acceptance.
John Deere 8-Inch Vertical Polisher and sander features a built-in regulator for speed
control and through handle exhaust which vents air away from work surface. Includes
polishing bonnet, sander, backing plate and wrench.
This operator's manual was compiled for your benefit. By reading and following the simple
safety, installation, operation, maintenance and troubleshooting steps described in this
manual, you will receive years of trouble-free operation from your new vertical polisher.
The contents of this manual are based on the latest product information available at the
time of publication. The manufacturer reserves the right to make changes in price, color,
materials, equipment, specifications or models at any time without notice.
Once the unit has been removed from the box, immediately write in the serial number of your
unit in the space provided below.
SERIAL NUMBER_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim
with the transportation company immediately. Be sure that all damaged parts are replaced and
that the mechanical problems are corrected prior to operation of the unit. If you require service,
contact your Customer Service.
Mi-T-M ® Corporation, 8650 Enterprise Drive, Peosta, IA 52068
1-877-JD-KLEEN / (1-877-535-5336) Fax 563-556-1235
Monday - Friday 8:00 a.m. - 5:00 p.m. CST
Please have the following information available for all service calls:
1. Model Number
2. Serial Number
3. Date and Place of Purchase
Introduction