Jonsered GR 2126D - Manual (Page 27)

English –
27
TECHNICAL DATA
Technical data
Engine
Displacement, cu. in/cm
3
Cylinder bore, inch/mm
Stroke length, inch/mm
Recommended max. speed, rpm
Idling speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Sound levels (se note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3-1997,
dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to ANSI B175.3-1997, m/s
2
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
GR2126D
1,50/24,5
1,26/32
1,06/27
11 000-11 700
2 700
8 014
0,9 kW/ 9 000 rpm
No
Yes
Walbro MB
Champion RCJ 7Y
NGK BPMR 7A
0,02/0,5
Zama C1Q
1,06/0,5
9,9/4,5
91/97
1,1/1,0
1,6/1,9
1,5/1,3
5,5/3,5
Approved accessories GR2126D
Centre hole in blades Ø 25,4 mm
Threaded blade axle M10
Grass blade
Trimmer head
Plastic knifes
Cutting attachment guard Art No.
503 93 42-04
503 93 42-04
503 93 42-04
503 93 42-04
503 93 42-04
Type
Grass 255-4 1" (
∅
255 4-teeth)
Grass 255-8 1" (
∅
250 8-teeth)
Tap´n go Pro
Trimmy HII
Polytrim
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.