JVC 0403-NIC-JMT - Manual (Page 11)

11
PIP button
You can display sub-picture on top of
main-picture.
Press this button to display sub-
picture.
• When PIP button is pressed while sub-picture
is displayed, sub-picture is closed.
• When TV/TEXT button is pressed while
sub-picture is displayed, sub-picture is closed
and TEXT screen is displayed.
• Only the sound for main-picture is audible
using the headphone and the sound for sub-
picture is not audible.
• When PIP button is pressed while the
main-picture input soure is the same as the
last sub-picture input source, the input source
of sub-picture is automatically changed to the
next input source.
• When PIP button is pressed while BLUE
BACK function is on and main-picture is not
receiving TV signal, BLUE BACK function is
disabled.
• When PIP button is pressed while MENU is
displayed, MENU is closed and main-picture
together with sub-picture on top are
displayed.
• PIP button cannot operate in COMPRESS (16:9)
mode.
SUB +/– button
When the input source of sub-picture is
TV mode and sub-picture is displayed,
you can change the channel of sub-picture
by this button.
• When the input source of sub-picture is TV
mode, pressing of SUB +/– button to effect
up/down of channel.
• When the input source of sub-picture is other
than TV mode, SUB +/– button is disabled.
Remote control buttons and functions
SWAP ( ) button
You can swap the input source of main
and sub-pictures by this button while
sub-piture is displayed.
Press this button to swap the input
source of main and sub-pictures so that
the image of sub-picture is displayed
on main-picture and vice-versa.
INPUT ( ) button
You can select the input source of
sub-picture by this button.
Press this button repeatedly to select
the desired input source.
• Depending on the input source of
main-picture, each press of INPUT button
changes the input source of sub-picture as
follows:
Main-picture: TV mode
VIDEO-1 VIDEO-2 VIDEO-3
Main-picture: VIDEO-1
TV mode VIDEO-2 VIDEO-3
Main-picture: VIDEO-2
TV mode VIDEO-1 VIDEO-3
Main-picture: VIDEO-3
TV mode VIDEO-1 VIDEO-2
• When the input source of main-picture is set
to VIDEO-2 with COMPONENT, PIP button is
disabled and sub-picture cannot be displayed.
• When the input source of main-picture is
other than VIDEO-2 and VIDEO-2 is set to
COMPONENT, the input source of sub-picture
cannot select VIDEO-2.
GGT0013-2937V1-E9 6/5/03, 9:56 PM 11