JVC 0403-NIC-JMT - Manual (Page 13)

13
Viewing teletext programmes
■ Basic operation
1 Select a TV channel with a teletext
programme.
2 Press the TV/TEXT button to
change the TV mode to the
teletext mode.
The mode cycles as follows:
3 Select a teletext page by pressing
the CHANNEL –/+ button, Number
buttons or coloured buttons.
To return to the TV mode, press the TV/
VIDEO button or the TV/TEXT button.
• If you have trouble receiving teletext
broadcasts, consult your local dealer or the
teletext station.
• If characters on a teletext programme do not
appear properly, change the TELETEXT
LANGUAGE setting. For details, see “TEXT
LANGUAGE” on page 21.
Using the List Mode
You can store the numbers of your
favorite teletext pages in the List mode
and call them up quickly using the
coloured buttons.
To store the page numbers:
1 Press the MODE button to engage
the List mode.
The stored page numbers are
displayed at the bottom of the screen.
2 Press a coloured button to select a
position. Then press the Number
buttons to enter the page number.
3 Press and hold down the STORE
button.
The four page numbers blink white to
indicate that they are stored in
memory.
To call up a stored page:
1 Press the MODE button to engage
the List mode.
2 Press a coloured button to which a
page has been assigned.
To exit the List mode, press the MODE
button again.
REVEAL
HOLD
SUBPAGE
STORE
Coloured
buttons
SIZE
INDEX
CANCEL
PICTURE
MODE
CHANNEL
SCAN
C.SYS
CHANNEL
RETURN+
MODE
VOLUME
4 5 6
7 8 9
0 -/--
TV
RM-C1300
FAVORITE CH
SUB – ? SUB + 5
5 5 5 i
TIMER
TV mode TEXT mode (TEXT only)
MIX mode (TV and TEXT)
GGT0013-2937V1-E9 6/5/03, 9:56 PM 13