JVC HR-XV1EK - Manual (Page 21)

21
Repeat Playback
To cancel the auto repeat mode, follow
the above steps 1 and 2, then select "OFF"
and confirm by pressing SET UP MENU.
Note:
If the Repeat function is switched
on, the playback will continue until
it reaches the tape-end and then
rewind to the beginning of the tape.
This process will repeat until the
unit is turned off. To set the Repeat function
• Turn on the TV and select the VCR channel on TV.
• Press VCR to select the VCR mode.
Preparation
3
Press SET UP MENU repeatedly until the TV picture
appears. If "ON" has been selected, the tape will be
repeatedly played.
1
Press SET UP MENU.
Press
▲
or
▼
to select the AUTO
REPEAT.
Press or to select
[ON] or [OFF].
2
SELECT : /
CHANNEL SETUP
ENTER
EXIT : OK
: MENU
VCR SETUP
AUTO REPEAT ON
SYSTEM SETUP
TIMER REC SET
SELECT : /
CHANNEL SETUP
ENTER
EXIT : OK
: MENU
VCR SETUP
AUTO REPEAT OFF
SYSTEM SETUP
TIMER REC SET
2A77501B E(18-23) 5/30/02, 9:22 PM 21