Zooming, Flash, Checking the remaining space onthe recording media – JVC Everio GZ-HM1 User Manual

Page 21: Checking the remaining batterypower, Zooming flash checking the remaining space on the, Recording media, Checking the remaining battery power

Advertising
background image

1

EN

NOTE

•

It is recommended to set the image stabilizer to off

when shooting a subject of little movement with the
unit on a tripod.

•

Complete stabilization may not be possible if

camera shake is excessive.

Zooming

Preparation:

•

Select

!

or

#

mode.

•

Select the recording mode.

Zoom in

Zoom out

T: Telephoto

W: Wide angle

You can also zoom out/zoom in by selecting [W] or [T]
on the LCD monitor. (On-screen zoom control)

Zoom ratio (factory-preset)

!

mode

#

mode

[10X/OPTICAL]

[10X/OPTICAL]

To change the maximum zoom ratio
(

!

mode only)

Change the settings in [ZOOM].

NOTE

Macro shooting is possible as close as approx. 5 cm
to the subject when the zoom lever is set all the way
to W.

Flash

Preparation:

•

Select

#

mode.

•

Select the recording mode.

1

Touch MENU.

2

Select [FLASH].

3

Select the desired setting.

1

OFF

Disables this function.

AUTO

The flash fires automatically.

AUTO

RED-EYE

The flash fires automatically but
reduces the red-eye phenomenon
of the subject’s eyes.

(

ON

The flash fires regardless of the
shooting condition.

SLOW

SYNCHRO

The flash fires. The shutter
speed becomes slower, so
that background can also be
brightened.

NOTE

•

The flash does not work during [CONTINUOUS

SHOOTING] and [BRACKETING].

•

The flash does not work with the following SCENE

SELECT settings.
[LANDSCAPE] [TWILIGHT] [NIGHT] [SNOW]
[BEACH] [FIREWORKS] [SUNSET]

•

It is recommended shoot distance within 2 m.

•

When the flash seems weak, change the setting

of [GAIN] to [AUTO], [ISO800] or higher (except
[ISO6400], under which the flash does not work).

Checking the Remaining Space on
the Recording Media

Preparation:

•

Select

!

mode.

•

Select the recording mode.

Press INFO.

The maximum recording time is displayed for each
video quality mode.

To change the video quality
1) Select the video quality.
2) Select [SET].

To quit the screen
Select [QUIT].

Checking the Remaining Battery
Power

!

mode:

Press INFO and then select

;

.

#

mode:

Press INFO.

To quit the screen
Select [QUIT] or press INFO.

NOTE

The recordable time display should only be used as a
guide. It is displayed in 10 minute units.

Selected recording medium only

RECORDING/PLA

YB

A

CK

Advertising