Jackson Enodis 300X - Manual (Page 50)

300X Series Technical Manual 7610-002-64-22
Issued: 07-26-2006 Revised: N/A
SECTION 6: PARTS SECTION
WASH PUMP EXPLODED VIEW
45
ITEM QTY DESCRIPTION Mfg. No.
1 2 Pipe Plug, 1/4” NPT, Brass 04730-209-01-00
2 1 Volute (only available as an assembly) N/A
3 1 Impeller, Stainless 05700-002-06-19
4 1 O-ring, Housing Seal N/A
4 1 Flat Gasket 05330-002-00-31
5 1 Pump Seal 05330-002-06-21
6 4 Stud, Socket Head 3/8”-16 x 1 1/2” N/A
7 4 Nut, Hex, 3/8”-16 S/S N/A
8 4 Cap Screw, 3/8”-16 x 1-1/4”, S/S N/A
9 1 Bracket, Motor to Pump N/A
10 1 Slinger, Pump Shaft N/A
11 1 Shaft Adapter/Connector N/A
12 2 Allen Head Setscrew, 1/4”-20 x 1/4” N/A
1
2
3
5
*4
6** 7
8
9
10
11
12
* Previous models used a flat gas-
ket. O-ring seal can be replaced
with flat gasket. Flat gasket must be
replaced with flat gasket only.
** Apply red Loc-Tite adhesive to
threads before installation into
volute housing. Tighten using 3/16”
allen wrench.
Replacement motors are avail-
able for purchase. Contact
Jackson directly to ensure that
you order the correct motor for
your model.