Important for laser products, How to reset your unit, English – JVC LVT1003-001B User Manual

Page 2: Warnings

Advertising
background image

2

ENGLISH

IMPORTANT FOR LASER PRODUCTS

Precautions:

1. CLASS 1 LASER PRODUCT
2. CAUTION: Invisible laser radiation when open

and interlock failed or defeated. Avoid direct
exposure to beam.

3. CAUTION: Do not open the top cover. There

are no user-serviceable parts inside. Leave all
servicing to qualified service personnel.

4. CAUTION: This CD player uses invisible laser

radiation, however, is equipped with safety
switches to prevent radiation emission when
unloading CDs. It is dangerous to defeat the
safety switches.

5. CAUTION: Use of controls, adjustments or

performance of procedures other than those
specified herein may result in hazardous
radiation exposure.

BEFORE USE

*

For safety....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

*

Temperature inside the car....

If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.

SEL (select)

(standby/on/attenuator)

WARNINGS

• DO NOT install any unit in locations where;

– it may obstruct the steering wheel and

gearshift lever operations, as this may result
in a traffic accident.

– it may obstruct the operation of safety

devices such as air bags, as this may result
in a fatal accident.

– it may obstruct visibility.

• DO NOT operate any unit while manipulating

the steering wheel, as this may result in a
traffic accident.

• The driver must not watch the monitor while

driving.
If the driver watches the monitor while driving,
it may lead to carelessness and cause an
accident.

• If you need to operate the unit while driving,

be sure to look ahead carefully or you may
be involved in a traffic accident.

How to reset your unit

While holding SEL (select), press

(standby/on/attenuator) for more than 2 seconds.

This will reset the built-in microcomputer.

Notes:

• Your preset adjustments—such as preset channels or sound adjustments—will also be erased.
• If a disc is in the unit, it will eject when you reset the unit. Be careful not to drop the disc.

EN02_04KD_SV3000[U].p65

03.4.17, 2:58 PM

2

Advertising