JVC AV 36P903 - Manual (Page 52)

Button Functions - PIP
PIP Introduction
PIP displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you
can view pictures from two different channels simultaneously. A special set of PIP control but-
tons are located on the upper part of the remote control. Descriptions of each button appear
on this page.
PIP/Move
Turn PIP on by pressing the PIP/M OVE button.
02
07
Cable Box Note
The 2-Tuner PIP function may not operate when used with certain cable boxes. This is
because while some models of cable box may receive up to 181 channels, they may only send
the signal from one channel to your television (please also see diagram on page 14). For the
PIP tuner to operate correctly, it must have access to all available channels. Since the televi-
sion is receiving the signal of only one channel from the cable box, it is impossible for the 2-
Tuner PIP to display a second, different channel.
Because there are many different models of cable boxes in use today, if you are having prob-
lems operating your PIP feature with your cable box, we recommend you contact your local
cable company for connection advice.
52
P IP O FF to turn PIP off
PIP/M OVE
Each press of PIP/M OVE will shift the PIP window to a different corner.
PIP/M OVE
Once PIP is turned on, you can move the PIP window to any of the TV’s main picture’s
four corners with the PIP/M
OVE button.