JVC AV 36P903 - Manual (Page 53)

Button Functions - PIP
Freeze
Swap
Channel +/–
Source
Use the F REEZE button to lock a single, still image onto the PIP window.
• If PIP is off when F REEZE is pressed, a snapshot of the main screen is taken and placed in
the PIP window.
• If PIP is on when F REEZE is pressed, the image in the window when the button was pressed
is held.
You can exchange the channel displayed on the main screen for the one shown in the PIP win-
dow by pressing S
WAP .
Like the main C HANNEL +/– buttons, C HANNEL +/– for PIP lets you scan through the channels in
the PIP window.
• Direct channel selection with the 10 key pad for PIP is not possible.
You can select the signal source for the PIP window image.
TV V-1 V-2 V-3 V-4
• The PIP window is 1/9 the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
• PIP will not display the following conditions:
• When the Aspect is 16:9
• When the main picture is displayed as 480p, 720p and 1080i
• When the main picture is Digital-In
• Component Connection without S-Video or Composite Connection
NOTE:
53