Caution – John Deere ET-3407 User Manual

Page 7

Advertising
background image

14-inch Abrasive Chop Saw Operator's Manual

7

1.

Wear eye protection.

2.

Wear mask or respirator when dust is generated.

3.

Tighten cutoff wheel bolt and all clamps before running.

4.

Disengage spindle lock before operating.

5.

Keep guards in place and working properly.

6.

Keep hands clear of cutoff wheel.

7.

Never reach behind or beneath the cutoff wheel.

8.

Never cut anything free hand.

9.

Wait for wheel to stop before moving work piece.

10. Unplug before adjusting or servicing.
11. To avoid electrical shock, do not use under damp conditions or expose to rain.
12. After installing a new replacement wheel, never start the tool with a person in line

with the wheel. Always run the tool for approximately one minute before cutting. If
the wheel has an undetected crack or flaw, it could burst in less than one minute.

13. Use only wheels rated at 3200 RPM or higher.
14. Do not attempt to cut wood, masonry or magnesium with tool.

CAUTION

Advertising