JVC I'Art Pro LCT1885-001A-A - Manual (Page 59)

59
Button Functions
By pressing the S OUND button, you can change the Hyper Surround mode and SMART
SOUND on or off.
HYPER SURROUND - Creates a deep, three-dimensional sound effect by channeling the
audio through the TV’s front-firing speakers..
SMART SOUND - Decreases high sound levels, giving a regulated sound level.
Press the S OUND button
π† To select HYPER SURROUND or SMART SOUND
è To choose the setting
Press the M ENU when finished
Sound
SOUND EFFECT
SELECT OPERATE EXIT MENU
HYPER SURROUND
SMART SOUND
ON OFF
ON OFF
The R ETURN +/TV button has three functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the R ETURN +/TV and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the C HANNEL +/– buttons.
Press the R ETURN +/TV
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the R ETURN + button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel
return+.
Return +/TV
RETURN CHANNEL
PROGRAMMED!
Note: Smart Sound may become an unnatural effect, depending on the signal source.
LCT1885-001A-A ENG 59 7/20/05, 9:08:05 AM