JVC HM-DH5U - Manual (Page 44)

Masterpage:Left-FullCol
44
EN
Filename [HM-DH5U_Eng.fm]
TIMER RECORDING (cont.)
Express Timer
Programming
You can directly program the VCR’s timer to record up to
24 broadcasts, as far as a year in advance. Remember,
the clock must be set before you can program the timer
(A page 17).
A
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
• The VCR turns on, and the counter is reset,
automatically.
B
Access VCR PLUS+ screen
Press [PROGRAM].
C
Access Program screen
Press [START +/–] once.
D
Set program start time
E
Set program stop time
Press [STOP +/–] repeatedly to enter the time you
want recording to stop.
• Press and hold [STOP +/–] to increase or
decrease the time in 30-minute intervals.
F
Set program date
Press [DATE +/–]. (The current date is displayed
on the screen. The date you enter appears in its
place.)
G
Set channel number
Press [TV/VCR CH +/–].
• If you are using a DBS receiver, see
‘ATTENTION FOR DBS RECEIVER USERS’ on
next page.
• Holding down [TV/VCR CH +/–] rapidly
changes the channel numbers.
• Turn on the VCR and the TV, and select the AV
mode on the TV.
• Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
A
[TIMER(j)]
[POWER]
[POWER]
B J
H
I
C - G
[TIMER ( )]
[WEEKLY]
[DAILY]
[DBS]
VCR
TV
CABLE
/DBS
Press [START +/–]
repeatedly to enter
the time you want
recording to start.
• Press and hold
[START +/–] to
increase or
decrease the time in
30-minute intervals.
CONFIRM CANCEL
STD (SP)
8:00 PM
START TIME STOP TIME DATE
DAILY/WEEKLY
CH
SOURCE
TIMER PROGRAM
REC SPEED
SET PROGRAM WITH [+/ , REC SPEED
8=DAILY, 9=WEEKLY] THEN PRESS "CONFIRM"
START STOP DATE CH EXIT
PROG.
EVERY SUN
AM :
HM-DH5U_Eng.fm Page 44 Wednesday, June 2, 2004 12:43 PM
(X:100.0%, Y:100.0%) Created with Grafikhuset CMYK PDF Creator for keiji tanaka at Sanwa Document Services P/L.