JVC CA-EXD1 - Manual (Page 44)

40
How the daily timer works:
Once the daily timer has been set, the timer
indicator and timer number indicator (1/2/3) are lit
on the display window. Daily timer turns on the
system at the same time everyday until the timer
setting is canceled manually or another daily timer
is activated.
When the on-time comes:
The system turns on, tunes in to the specified
station or start playback the loaded disc with the
volume level set to the preset level.
• The timer setting remains in memory until you
can change it.
• Without canceling the daily timer, you can
change the source or adjust the volume after the
daily timer starts playback.
1
Press CLOCK/TIMER repeatedly
to show “DAILY 1.”
• Each time you press the button, the clock
setting changes as follows:
2
Press cursor
2/3 to adjust the
hour of the timer-on time, then
press SET.
3
Press cursor
2/3 to adjust the
minute of the timer-on time,
then press SET.
4
Repeat Step 2 and 3 to set the
timer-off time.
5
Press cursor
2/3 to select the
playback source, then SET.
• Each time you press the button, the clock
setting changes as follows:
• When selecting the tuner, press cursor
2/3
to select a preset channel.
• When selecting “DISC”, you can specify the
group and track. For the discs other than
MP3/WMA, the group selection does not
take effect.
6
Press cursor
2/3 to adjust the
volume level, then SET.
7
Turn off the system.
To turn off the timer setting
1
Press CLOCK/TIMER repeatedly
to select the timer setting.
2
Press CANCEL to turn off the
selected setting.
• Pressing SET activates the timer setting
again.
If there is no operation for 3 minutes while the disc
is stopped, the power will be automatically turned
off.
Press A.STANDBY during playback
or while the disc is stopped, or no
disc is loaded (“NO DISC” appears).
The A.STANDBY indicator lights on the display
window on the main unit.
When a stopped state is entered (after playback is
finished, for example), the A.STANDBY indicator
starts blinking.
This means that the power will be turned off
automatically if there is no operation for 3 minutes.
And 10 seconds before the power is turned off,
“A.STANDBY” starts flashing.
Releasing Auto Standby
Press A.STANDBY.
“A.STANDBY” will be turned off on the display
window on the main unit.
NOTE
When the source is FM, AM, USB or AUX, Auto
Standby does not work.
DAILY 1
ON 6:00
DAILY 2
ON 12:00
ON 18:00
DAILY 3
Source
indication
Clock adjust
TUNER FM
TUNER AM
AUX
DISC
Auto Standby
Convenient functions
Setting the Various Timer (continued)
EX-D1[B].book Page 40 Wednesday, March 2, 2005 9:03 PM