Jura Capresso IMPRESSA X7 - Manual (Page 12)

12
Place two sufficiently large vessels under the pivoting nozzle
(18) and the coffee spout.
Ⅲ Press the key
Ⅲ
: UNIT DECALCIFYING / PLEASE WAIT
Ⅲ An acoustic signal is heard
Ⅲ
: EMPTY DRIP TRAY
Ⅲ : FILL WATER TANK
Ⅲ Place a vessel under the pivoting nozzle (18) and the coffee
spout (4).
Ⅲ : PRESS DESCALING
Ⅲ : UNIT DECALCIFYING / PLEASE WAIT
Ⅲ An acoustic signal is heard
Ⅲ
: EMPTY DRIP TRAY / CLEAN CONTACTS
(Chapter 15.11).
20. Disposal
For correct disposal, you should return your coffee machine to your
dealer, Jura service centre or the firm of Jura.
21. Adjustments by the Jura service technician
The following adjustments/alterations can only be done by a
Jura service technician.
– Re-arrangement of the key occupancy of the coffee
products
– Alteration of the cycles in “pot of coffee” draw-off
– Filter capacity
22. Tips for perfect coffee
Height-adjustable coffee spout
You can adjust the height of the coffee spout to the size of your
cups.
Grinding
Please refer to Chapter 7 “Setting of grinder“
Pre-warm cups
You can warm the cups in advance with hot water or steam. The
smaller the quantity of coffee, the more important the warming of
the cups.
Sugar and cream
Heat is lost by stirring the contents of the cup. Adding milk or
cream from the fridge considerably lowers the temperature of the
coffee.