Jura Capresso IMPRESSA X7 - Manual (Page 9)

9
You can interrupt the draw-off prematurely at any time by
pressing the draw-off key again.
10 min. after the draw-off of milk, a rinsing is automatically
started. The rinsing is announced in advance by an acoustic
signal.
13. Switching the machine off
Ⅲ Switch the machine off with the ON/OFF operating switch. A
rinsing is automatically started when the machine is switched
off.
14. Programming
The following phases can be programmed:
ᮣ Grinding amount
ᮣ Temperature
ᮣ Amount of water
ᮣ Amount of milk
ᮣ Portion of hot water
ᮣ Water hardness
ᮣ Clock
ᮣ Machine on
ᮣ Machine off
ᮣ Draw-offs
ᮣ Language
14.1 Programming grinding amount
Ⅲ Switch your machine on the with ON/OFF operating switch.
Ⅲ Press the key PROG. until an acoustic signal is heard.
Ⅲ
: ADJUST COFFEE QUANTITY /
SELECT PRODUCT
Ⅲ Press the required draw-off key.
Ⅲ
: (selected product)
– ..............II.............. +
Ⅲ By pressing the key or you can determine the amount to
be ground.
Ⅲ To store, press the key PROG.
Ⅲ
: (selected product)
Ğ: 100% ġ: 0%
You can determine the allocation of the grinder “left” or “right”.
Ⅲ By pressing the key or you can change the values.
Ⅲ To store, press the key PROG.
Ⅲ
: ADJUST COFFEE QUANTITY /
SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
14.2 Programming Temperature
Ⅲ : ADJUST TEMPERATURE / SELECT PRODUCT
Ⅲ Press the required draw-off key.
Ⅲ
: (selected product)
STAND. TEMP.
Ⅲ Select the required temperature with the keys or (high or
standart)
Ⅲ To store, press the key PROG.
Ⅲ
: ADJUST TEMPERATURE / SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
14.3 Programming amount of water
Ⅲ : ADJUST WATER QUANTITY /
SELECT PRODUCT
Ⅲ Press the required draw-off key.
+
- +
+
- +
- +
Ⅲ : (selected product)
WATER 90 ML
Ⅲ You can change the value by pressing the key or .
Ⅲ To store, press the key PROG.
Ⅲ
: ADJUST WATER QUANTITY /
SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
14.4 Programming amount of milk
Ⅲ : ADJUST MILK QUANTITY / SELECT
PRODUCT
Ⅲ Press the key or
Ⅲ
: (selected product)
10 SEC.
Ⅲ You can alter the time by pressing the keys or (draw-off
time from 3 – 60 sec.)
Ⅲ To store, press the key PROG.
Ⅲ
: ADJUST MILK QUANTITY / SELECT
PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
14.5 Programming portion of hot water
Ⅲ Place a cup under the pivoting nozzle (18).
Ⅲ
: HOT WATER PORTION / PRESS FOR HOT
WATER
Ⅲ : ENOUGH HOT WATER ? / PRESS FOR HOT
WATER
Ⅲ : HOT WATER PORTION / PRESS FOR HOT
WATER
Ⅲ Press the key in order to reach the next phase or the key
EXIT to quit the programming.
14.6 Programming water hardness
Ⅲ : WATER HARDNESS
LEVEL 3
Ⅲ Press the key PROG.
Ⅲ You can set the water hardness by pressing the keys
or .
Ⅲ To store, press the key PROG.
Ⅲ Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
To determine the water hardness, please read Chapter 8
“Setting the water hardness”
14.7 Programming CLOCK
Programming the clock is necessary if the function “Machine on”
is used.
Ⅲ
: TIME.
—:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys
or you can set the hours.
Ⅲ To store, press the key PROG.
Ⅲ By pressing the keys
or you can set the minutes.
Ⅲ To store, press the key PROG.
Ⅲ Press the key
in order to reach the next phase or the key
EXIT to quit the programming.
+
- +
- +
+
- +
+
+
- +
+
- +
E