Janome MEMORY CRAFT 9700 - Manual (Page 22)

20
1
2 3
1
Adjusting the Foot Pressure
The foot pressure control dial should be set at “3” for
regular sewing.
Reduce the pressure to “2” for applique, cut work,
drawn work and basting.
Set the dial at “1” when sewing extra fine fabrics.
Foot pressure control dial
1 Setting mark
Dropping the Feed Dog
The feed dog will automatically drop when the basting
stitch, button sewing or the embroidery mode has
been selected.
The feed dog can also be lowered by the drop feed
lever for sewing on buttons, manual embroidery.
Push the drop feed lever to the left to lower the feed
dog.
Push the lever to the right to raise the feed dog, it will
return to the up position when starting the machine.
1 Drop Feed Lever
2 Down position
3 Up position
NOTES:
The feed dog should be in the up position for normal
sewing. Turn the handwheel toward you to check if the
feed dog comes up after setting the lever in the up
position.
The feed dog will automatically drop when the
embroidery mode, basting stitch, button sewing. has
been selected.