Janome MEMORY CRAFT 9700 - Manual (Page 24)

22
SETTING MODE
Pressing the SET key will open the mode setting
window.
1 SET key
Press the SET key to customize the machine settings.
2 Flag key (Language selection key)
Press the flag key to select the language for the
screen display. You can select one of 11 languages.
3 Screen contrast
The visual touch screen contrast can be adjusted.
Press the Plus key, to sharpen the screen contrast.
Press the Minus key, to fade the screen contrast.
4 Sound control
The buzzer volume can be adjusted. The volume level
can be set from (0 to 10) and the default setting is 5.
Press the Plus key, to increase the buzzer volume.
Press the Minus key, to decrease the buzzer
volume.
When you select 0 the buzzer turns off.
5 Eco mode
After turning on the power switch, if you have not used
the machine, after a while, the machine will enter Eco
Mode. The visual touch screen will go dark and the
sewing light will turn off.
Whenever you touch the screen while the machine is in
Eco mode, the screen and sewing light will turn on
again.
You can set the Eco mode timer from 1 minute to 30
minutes. The default setting is 10 minutes.
To set the Eco Mode timer:
Press the Plus key to increase the timer setting.
Press the Minus key to decrease the timer setting.
To turn off the Eco mode, Press the Plus key until
“OFF” shows in the box.
SET
A Z
Edit
1 2 3 4
5 6 7 8
Designs
Hoop Size A(F): 126 X 110mm
Screen Contrast
+
inch/mm
5
+
Eco Mode
SET
inch mm
Register
10 min
1
2
3
4
5