John Deere D-SERIES 333D - Manual (Page 18)

329D / 333D
18
19
Engine 329D 333D
Manufacturer and Model John Deere PowerTech TM E 5030HT John Deere PowerTech E 5030HT
Non-Road Emissions Standard EPA Tier 3/EU Stage IIIA EPA Tier 3/EU Stage IIIA
Cylinders 5 5
Net Peak Power (SAE J1349 / ISO 9249) 59.6 kW (80 hp) at 2,000 rpm 66.7 kW (89 hp) at 2,400 rpm
Gross Peak Power (ISO 14396) 63.4 kW (85 hp) at 2,200 rpm 71.1 kW (95 hp) at 2,400 rpm
Peak Torque 300 Nm (221 ft.-lb.) at 2,000 rpm 341 Nm (252 ft.-lb.) at 1,950 rpm
Displacement 3.0 L (186 cu. in.) 3.0 L (186 cu. in.)
Net Torque Rise 43.0% at 1,700 rpm 36.9% at 1,680 rpm
Aspiration Turbocharged and intercooled Turbocharged and intercooled
Air Cleaner Dry dual element Dry dual element
Cooling 329D / 333D
Fan Drive Variable-speed hydraulic drive
Powertrain 329D 333D
Pump Manual axial-piston hydrostatic-servo Manual axial-piston hydrostatic-servo
Travel Speeds
Single Speed
10.0 km/h (6.2 mph) —
2 Speed, Optional
Low
8.5 km/h (5.3 mph) 8.5 km/h (5.3 mph)
High 12.6 km/h (7.8 mph) 12.6 km/h (7.8 mph)
Brake Integral, automatic, spring applied, hydraulically released wet-disc brake
Undercarriage
Rubber Tracks
New-generation smooth-ride long-life rubber with steel inserts
Track Width
Standard
400 mm (15.8 in.) 450 mm (17.7 in.)
Optional 450 mm (17.7 in.) 400 mm (15.8 in.)
Ground Pressure
400-mm (15.8 in.) Track (329D standard, 333D optional)
34.2 kPa (5.0 psi) 34.7 kPa (5.0 psi)
450-mm (17.7 in.) Track (329D optional, 333D standard) 30.6 kPa (4.4 psi) 31.1 kPa (4.5 psi)
Track Rollers (per side) 5 triple-fl ange smooth-ride all-steel rollers 5 triple-fl ange smooth-ride all-steel rollers
Track Idlers (per side) 2 double-fl ange smooth-ride all-steel rollers 2 double-fl ange smooth-ride all-steel rollers
Bearings/Seals (rollers/idlers) Heavy-duty journal bearings and metal face seals Heavy-duty journal bearings and metal face seals
Tractive Effort 5227 kgf (11,500 lbf) 5227 kgf (11,500 lbf)
Hydraulics
Pump Flow
Standard
80 L/m (21 gpm) 95 L/m (25 gpm)
High-Flow Option Total 125 L/m (33 gpm) 129 Lm (34 gpm)
System Pressure at Couplers 23 787 kPa (3,450 psi) 23 787 kPa (3,450 psi)
Hydraulic Horsepower (calculated)
Standard Flow
34.3 kW (46 hp) 39.5 kW (53 hp)
High-Flow Option 53.7 kW (72 hp) 54.4 kW (73 hp)
Cylinders 329D / 333D
John Deere heat-treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins
Electrical
Voltage
12 volt
Battery Capacity 925 CCA
Alternator Rating 70 amp
Lights Halogen, 2 front and 1 rear standard
Operator’s Station
ROPS (ISO 3471)/FOPS (ISO 3449) structure with quick-pivot standard
Serviceability
Refi ll Capacities
Fuel Tank
111.0 L (29.0 gal.)
A
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan Magenta Yellow Black
DKADCTLCWP Page 18 D