JVC DT-V17G1 - Manual (Page 10)

10 Daily Operations / Connections
(cont.)
7 Available signals
Video signals
No. Signal name
Signal format
shown in the status display
( ☞ page 7)
Input terminal
VIDEO
COMPO.(Analog
component)* 1
E. AUDIO SDI (IN 1, IN 2)* 2 DVI-D (HDCP)
(Digital component/digital RGB) SD/HD (1.5G) 3G SDI DUAL LINK
1 NTSC NTSC √ — — — — —
2 PAL PAL √ — — — — —
3 B/W50 B/W50 √ — — — — —
4 B/W60 B/W60 √ — — — — —
5 480/60i 480/60i — √ √ — — √
6 480/59.94i 480/59.94i — √ √ — — √
7 576/50i 576/50i — √ √ — — √
8 480/60p 480/60p — √ — — — √
9 480/59.94p 480/59.94p — √ — — — √
10 576/50p 576/50p — √ — — — √
11 640*480/60p 640*480/60p — — — — — √
12 640*480/59.94p 640*480/59.94p — — — — — √
13 720/60p 720/60p — √ √ √ — √
14 720/59.94p 720/59.94p — √ √ √ — √
15 720/50p 720/50p — √ √ √ — √
16 720/30p 720/30p — √ √ √ — —
17 720/29.97p 720/29.97p — √ √ √ — —
18 720/25p 720/25p — √ √ √ — —
19 720/24p 720/24p — √ √ √ — —
20 720/23.98p 720/23.98p — √ √ √ — —
21 1080/60i 1080/60i — √ √ √ √ √
22 1080/59.94i 1080/59.94i — √ √ √ √ √
23 1035/60i 1035/60i — √* 3 √ — — √* 3
24 1035/59.94i 1035/59.94i — √* 4 √ — — √* 4
25 1080/50i 1080/50i — √ √ √ √ √
26 1080/60p 1080/60p — — — √ √ √
27 1080/59.94p 1080/59.94p — — — √ √ √
28 1080/50p 1080/50p — — — √ √ √
29 1080/30p 1080/30p — √ √ √ √ √
30 1080/29.97p 1080/29.97p — √ √ √ √ √
31 1080/25p 1080/25p — √ √ √ √ √
32 1080/24p 1080/24p — √ √ √ √ √
33 1080/23.98p 1080/23.98p — √ √ √ √ √
34 1080/30psF 1080/30psf — √* 3 √* 3 √ √ —
35 1080/29.97psF 1080/29.97psf — √* 4 √* 4 √ √ —
36 1080/24psF 1080/24psf — √ √ √ √ —
37 1080/23.98psF 1080/23.98psf — √ √ √ √ —
38 1080/25psF 1080/25psf — — — √ √ —
* 1 Analog component signals are compatible with
Y on sync signals.
* 2 Compatible with EMBEDDED AUDIO signals.
* 3 The signal is recognized as 1080/60i, and the
status is displayed as “1080/60i.”
* 4 The signal is recognized as 1080/59.94i, and
the status is displayed as “1080/59.94i.”
√: Acceptable
—: Not acceptable
The following signals are available for this monitor.
On the signal format
The following messages appear depending on
the type of input signals and their conditions.
When a DVI-D signal protected with HDCP is
input
\ “*” (at the end of the indication)
When no video signal comes in
\ “NO SYNC”
When a noncompliant video signal comes in
\ “Out of range”
When “COLOR SYSTEM” (
☞ “FUNCTION
SETTING” on page 16) is set to “AUTO”
and the noncompliant composite video
signals come in
\ “OTHERS”
DT-V17G1_EN.indd 10 DT-V17G1_EN.indd 10 09.12.3 7:55:16 PM 09.12.3 7:55:16 PM