JVC TK-C553 - Manual (Page 18)

18
4.
Mount the camera body.
1) Ensure that the camera clamping
screw on the ceiling mount is
loosened.
2) Align the camera position alignment
mark on the camera body with the
camera position alignment mark on
the ceiling mount and press the
camera body straight against the
mount.
Note
Exercise caution when mounting so as not
to pinch the drop prevention wire and the
connected cables.
3) Rotate the camera body clockwise as
far as it will go.
At this point, check that the camera
body clamp is located on the lock
screw on the ceiling mount.
4) Tighten the camera clamping screw.
4.
CAUTION
Be sure to tighten the camera clamping
screw fully. Otherwise the camera body
may vibrate or drop from the ceiling.
To dismount the camera from the ceiling,
perform steps
2.
to
4.
in reverse order.
Rotate the
camera body
clockwise
Camera clamping
screw
Camera
clamping screw
Camera
clamping screw
Tighten the camera
clamping screw.
(1)
(2)
(3)
(2) Position alignment mark
(2) Camera position
alignment mark
Clamp
(4)
Ceiling Installation (Continued)
INSTALLATION