JVC Model KS-FX200 - Manual (Page 3)

3
ENGLISH
1
Turn on the power.
2
Play the source.
To operate the tuner, see pages 4 – 8.
To operate the tape deck, see page 9.
To operate the CD changer, see pages 15 – 17.
3
Adjust the volume.
4
Adjust the sound as you want (see pages 10 – 12).
To drop the volume in a moment
Press briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press for more than 1 second.
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 13.
Notes on One-Touch Operation:
• When you select tuner as a source in step 2 below, the power automatically
comes on. You do not have to press this button to turn on the power.
• If the cassette is already in the cassette compartment, tape play starts
automatically. However, it is not recommended to leave the cassette in the
compartment when turning off the power or ignition key. It may damage the
tape head and the cassette.
Volume level appears
2
1
3
F M
CD- CH
A M
/I/ATT
EN02-03.KS-FX200[J]f 9/27/00, 6:15 PM 3