GE RM24927 - Manual (Page 3)

5 4
VOLUME UP/DOWN
Changes the volume
level of the product,
normally the TV.
ON•OFF Turns
product On or Off.
MUTE Turns off the
TV sound while the
picture remains.
CODE SEARCH
For setup.
CHANNEL Up/Down
Changes the channels
TRACK +/- controls
DVD/CD track selection
i.e. DVD/CD Track Skip
Up/Down (in DVD and
CD modes).
Button Functions, cont.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
RECORD, PLAY, STOP, REW, FF, PAUSE VCR control
buttons operate your VCR even when the remote is set
to operate the TV. Also operates DVD Scan -/+. Note the
VCR keys also control DVD when in DVD Mode.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. PREV.CH may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV.CH ability
for the PREV.CH button to operate this feature.
ENTER
For some TV models, used
after direct channel number
entry to immediately change
to the selected channel.
TV, VCR, etc.
Selects product
to be operated. Red Indicator
Lights when any
button is pressed.
GUIDE displays
satellite or cable on-
screen program guide.
Button Functions
0-9
Enter numbers for direct
channel selection. Some
products require ENTER
to be pressed after
channel selection.
PREV.CH Returns to
the previously selected
channel.
SLEEP enables the remote
to turn off your TV after a
period of 1 to 99 minutes.
Navigation buttons and
SELECT used to move
through on-screen menuing
and guides. With some DBS
models the DISP button
should be used to select the
highlighted item. Use the
navigation buttons to move
the highlighted choice up,
down, left, or right.
MENU-PROG Brings up the
main menu. If you are ready
in the menu system, press
SELECT to select a high-
lighted choice. Use the arrow
buttons to move through the
menu selections.
DISP Display button
shows date and time
if your TV or VCR has
that feature.
TV/VCR Operates the TV/
VCR function of your TV.
PIP, SWAP, INPUT PIP and
SWAP operate your TV’s
Picture-in-Picture features.
INPUT selects the video input
of your TV.
CLEAR Removes the on
screen display to return to
normal viewing.