JVC Everio GZ-HM400 - Manual (Page 38)


EN
Warning Indications
Indication Action
SET DATE/TIME!
•
Set the clock. If the message still appears after setting the
clock, the battery for the clock has been depleted. Consult your
nearest JVC dealer.
COMMUNICATING ERROR
•
Be sure to use JVC battery packs.
CANNOT USE IN
VIDEO MODE
•
Set [REC MEDIA FOR VIDEO] to [BUILT-IN MEMORY].
•
Replace the SD card. (Files recorded with other devices that
support AVCHD cannot be played back on this camcorder.)
NOT FORMATTED
•
Select [OK] and select [YES] to perform formatting.
FORMAT ERROR! •
Check the operating procedure, and perform once again.
•
Turn off the camcorder, and turn it on again.
DATA DELETION ERROR
ERROR IN BUILT-IN
MEMORY!
•
Perform formatting. (All data is deleted.)
•
Turn off the camcorder, and turn it on again.
MEMORY CARD ERROR!
•
Perform formatting. (All data is deleted.)
•
Remove and re-insert the SD card. (MultiMediaCard cannot be
used.)
•
Remove any dirt from the SD card terminals.
•
Insert the SD card before switching the power on.
•
Turn off the camcorder, and turn it on again.
•
Do not change the folder name on a computer.
RECORDING CANCELLED
•
Turn off the camcorder and turn it on again.
•
Prevent the camcorder from vibration and shock.
RECORDING FAILURE
SD card:
•
Remove and re-insert the SD card. (MultiMediaCard cannot be
used.)
•
Remove any dirt from the SD card terminals.
•
Insert the SD card before switching the power on.
Built-in memory:
•
Do not allow the camcorder to be subject to impact/vibrations.
PLAYBACK FAILED
INSUFFICIENT SPACE
•
Delete files. Move files to a PC or other devices.
•
Replace the SD card with a new one.
VIDEO MANAGEMENT FILE IS
DAMAGED, RECOVERY IS
REQUIRED TO RECORD/PLAYBACK,
RECOVER?
• Select [OK] to restore.
FUR
THER INFORMA
TION