Fm station automatic preset: ssm – JVC KD-LH1105 User Manual

Page 11

Advertising
background image

11

ENGLISH

3

Tune in to a station you want while
“Manual Search” is flashing.

• If you release your finger from the button,

the manual mode will automatically turns
off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 50 kHz intervals for
FM and 9 kHz for AM) until you release
the button.

When an FM stereo broadcast is hard to
receive:

1

Press M (MODE) while listening to an FM
stereo broadcast.

“Mode” appears on the display.
The next-step-operation buttons
start flashing.

2

Press number button 1 repeatedly to select
“Mono On” while “Mode” is still on the display.
Each time you press the button, “Mono On” and
“Mono Off” appears alternately.

When “Mono On” is selected, the MONO
indicator lights up on the display, the sound you
hear becomes monaural but the reception will be
improved.

To tune in to stations
of higher frequencies

To tune in to stations of lower frequencies

If the sound quality decreases and the
stereo effect is lost while listening to an
FM station
In some areas, adjacent stations may
interfere with each other. If this interference
occurs, this unit can automatically reduce this
interference noise (the initial setting when
shipped from the factory). However, in this
case, the sound quality will be degraded and
the stereo effect will also be lost.
If you do not want to degrade the sound
quality and to lose the stereo effect, rather
than to eliminate the interference noise, see
“To change the FM tuner selectivity—IF Filter”
on page 27.

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).

1

Select the FM band (FM1 – 3) you
want to store FM stations into.

Each time you press the
button, the band changes as
follows:

FM1

FM2

FM3

AM

CONTINUED ON THE NEXT PAGE

EN10-14KD-LH1105[U]f.p65

1/24/03, 2:51 PM

11

Advertising