JVC KD-LH1105 - Manual (Page 22)

22
ENGLISH
2) Press 5 (up) or ∞ (down) to adjust the
level of the selected band within the
range of –05 to +05.
3) Repeat steps 1) and 2) to adjust the
other frequency bands.
5
Store the adjustment you made.
The confirmation message
appears—whether you want to
store the adjustment.
If you want to cancel the adjustments,
press EQ (equalizer).
6
Select one of the user sound modes
(User 1, User 2, or User 3) you want
to store into.
Storing your own sound
adjustments
You can adjust the sound modes to your
preference and store your own adjustments in
memory (User 1, User 2, and User 3).
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1 again.
1
Press EQ (equalizer).
The next-step-operation
buttons start flashing.
2
Select the sound mode you want to
adjust.
3
Enter the sound adjustment mode.
The following sound
mode adjustment
screen appears on the
display.
4
Make adjustments as you like.
1) Press ¢ or 4 to select the
frequency band—60Hz, 150Hz, 400Hz,
1kHz, 2.4kHz, 6kHz, 12kHz.
Ex.: When you select “User 1”
Ex.: When you select “Country” previously
EN20-23KD-LH1105[U]f.p65 1/24/03, 2:52 PM 22